CHLORINE DIOXIDE (ClO2) FOR HOSPITAL WATER & WASTE WATER TREATMENT
In the normal course of operation, hospitals generate a variety of waste products which are not suitable for normal disposal.
While some or most hospital waste may be harmless, it is difficult to distinguish such harmless waste from infectious waste. As a result, all of the waste from a hospital must be treated as if it is harmful. Because of its biocidal characteristics, ClO2 is ideal for water hygiene applications in hospitals and healthcare facilities. It has consistently been shown to be the best molecule for eradicating the causative organism of Legionnaires’ disease (Legionella). YEARUP ClO2 is a strong biocide even at concentrations as low as 0.1ppm. With minimal contact time, it is highly effective against many pathogenic organisms, including Legionella, Giardia cysts, E. coli, and Cryptosporidium. YEARUP ClO2 also greatly reduces and eliminates bio-film populations and discourages bacterial regrowth.
Benefits of YEARUP ClO2 for Hospital Water & Waste Water Treatment
1. YEARUP ClO2 keeps effective over a broad PH range from 4-10.
2. YEARUP ClO2 is superior to chlorine in control of spores, bacteria's, viruses and other pathogen organisms on an equal residual base.
3. YEARUP ClO2 has good solubility; The required contact time and dosage is lower.
4. Non-corrosive at the recommended dose rates. Reduces long term maintenance costs.
5. YEARUP ClO2 does not react with ammonia & does not produce toxic compounds in contact with organic materials present in water.
6. YEARUP ClO2 is better at removing iron and magnesia compounds than chlorine, especially complex bounds.
7. Micro-organisms do not develop resistance to ClO2.
8. Safe for consumption and approved for use around the world.
YEARUP ClO2 Products for Hospital Water & Waste Water Treatment
A+B ClO2 Powder 1kg/bag (Customized Package is available)
Single Component ClO2 Powder 500gram/bag, 1kg/bag (Customized Package is available)
1gram ClO2 Tablet 500gram/bag, 1kg/bag (Customized Package is available)
Usage & Dosage
Mother Liquid Preparation
Add 500g powder into 25kg water contained by plastic or porcelain container (DO NOT ADD WATER INTO POWDER), stir for 5 to 10 minutes to completely dissolve. This solution of ClO2 is 2000mg/L. The mother liquid can be diluted and applied according to the following chart.
|
Objects |
Concentration（mg/L） |
Disinfection Time |
Dosing |
|
Slightly Polluted Water |
0.5-1.5 |
30 |
Add equally according to water volume |
|
Heavy Polluted Water |
2-8 |
30 |
Add equally according to water volume |
|
Hospital Waste Water |
30-50 |
30-60 |
Add equally according to water volume |